text/microsoft-resx 2.0 System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 About Cancel deinstallation Cancel installation Cancel update Disable Enable Install Uninstall Update A dependency for this AddIn was not found. Install it to enable this AddIn. Disabled AddIn will be enabled after restarting SharpDevelop AddIn will be installed after restarting SharpDevelop This AddIns is installed twice. Please uninstall one copy. The AddIn must have an <Identity> for use with the AddIn-Manager. AddIn will be removed after restarting SharpDevelop AddIn will be updated after restarting SharpDevelop AddIn will be disabled after restarting SharpDevelop You cannot disable the AddInManager because you need it to re-enable AddIns! You cannot install AddIns inside the ${ProductName} directory, they will be picked up as pre-installed AddIns automatically. Aborts the deinstallation of the selected AddIn(s). Aborts the installation of the selected AddIn(s). Aborts the update of the selected AddIn(s). Disables the selected AddIn(s). Enables the selected AddIn(s). The selection is inconsistent, please select only AddIns with the same status. AddIn Installation Package SharpDevelop AddIns|*.addin;*.sdaddin|All files|*.* &Install AddIn You don't have any AddIns installed. Download an AddIn from the Internet, then click 'Install AddIn' and choose the downloaded file to install it. Open Website Options AddIns are required by: Required dependencies: Show preinstalled AddIns AddIn Manager Unknown file format: Install from archive... Repository: Search: Show preinstalled AddIns Show prereleases You cannot uninstall the AddInManager because you need it to re-install AddIns! SharpDevelop AddIn Repository Created by: Dependencies: Downloads: File name: Installed version: Last updated: More information New version: Rating: Report abuse Version: View License Terms Following installed AddIns are depending on "{0}": {1} They will stop working after disabling this AddIn! Are you sure you want to continue? Package "{0}" needs at least one additional package: {1} The application will try to download and install them, as well. Do you want to continue? Selected package doesn't contain a valid SharpDevelop AddIn. I &Accept I &Decline By clicking "I Accept" you agree to the license terms for the package listed above. If you do not agree to the license terms click "I Decline". By clicking "I Accept" you agree to the license terms for the packages listed above. If you do not agree to the license terms click "I Decline". The following package requires a click-to-accept license: The following packages require a click-to-accept license: License Agreements Add Automatically check for updates Move Down Move Up Name: Remove Source: AddIns General Repositories Following installed AddIns are depending on "{0}": {1} They will stop working after removing this AddIn! Are you sure you want to continue? SharpDevelop AddIns|*.sdaddin;*.addin|All files|*.* Click here to see the updates. Updates for SharpDevelop are available Available Installed Updates This file contains inconsistent newlines. Description label in inconsitent newlines groupbox Inconsistent Newlines Header of the 'Inconsistent Newlines' groupbox Normalize Button that normalizes the inconsistent newlines Error: Note: Mind the trailing space! Find next Find previous Use regular expressions Show Class Diagram TortoiseGit needs to be installed to execute this action. Error message when executing git command but TortoiseGit cannot be found Contents Display Contents Search Help Library Set Help Preference Cannot launch Help Library Manager, because there is no help catalog installed/selected. Please check your help settings (see Tools > Options > Tools > Microsoft Help Viewer). Error message when there is no help catalog active The Help Library Manager was not found. In order to use SharpDevelop's help feature please download and install Microsoft's Windows SDK 7.1. Help Library Manager was not found. Please check if it was installed correctly. Installed Help Catalogs Launch Help Library Manager Microsoft Help Viewer You requested an offline feature in the online help mode. You have to change the mode in order to use this feature. Search Look for: Search Show Help Use external help viewer I want to use local help I want to use online help Number of bytes per line hex editor option (number of bytes displayed in one line) Display 'display' group box in hex editor options Data Offset Numeral system Decimal Hexadecimal Octal Resize to fit current width Used for the HexEditor's full width display button in the left corner of the display. Back Contents Enter URL Forward Homepage Location New Window Search Stop Title Result Merged Nodes All functions for {0} The selected SharpDevelop profiling session was created by a newer version of SharpDevelop and thus cannot be opened. SharpDevelop Profiling Session This project cannot be started because the executable file was not found, please ensure that the project and all its depencies are built correctly! No startable project was found. Aborting ... This project cannot be started. Do you want to profile the solution's StartUp project instead? Preparing for analysis ... Could not register the profiler into COM Registry. Cannot start profiling! Could not unregister the profiler from COM Registry! Profile Combine recursive calls. Do not profile .NET internal calls. Collect data at the end of the session only. Start to collect data immediately after the session started. Data Collection Size of temporary storage file: Trace events Profiling Profile current project Select executable to profile Invalid data, please try again! Command line arguments: Select the path of the executable you want to profile. Optionally you can specify a working directory and command line arguments. Executable path: Start profiling Profile Executable Working directory: Collect data Shutdown Profiler control window Call count Calls: Clear query history Copy selected data Copy stacktrace Find calls of selected functions Go to definition Set as root/Merge Show functions CPU cycles: Execute query Expand selected hot path Name Overview Query History Search: Show query bar % of parent Time spent Time spent/call Time spent (self) Time spent (self)/call Time: Profiling Session Analyzer Top 20 Refreshing view, please wait ... Run with profiler Searching ... Add setter Select the fields you want to create properties for: Implement INotifyPropertyChanged Create properties Extract method Text of the "Extract Method" refactoring menu command. The selected code contains a break statement without the enclosing loop. Please change the selection! The selected code contains a continue statement without the enclosing loop. Please change the selection! The selected code contains a goto statement without the label. Please change the selection! Enter a name for the new method Invalid selection! Please select a valid range. Errors occured during parsing! Cannot extract a new method. Extracting methods in {0} is currently not supported! Used to notify the user that the MethodExtractor can not extract the code in the current programming language. {0} is the value from ProjectService.CurrentProject.Language Insert constructor Add check for null Add range check Select all fields you want to create a constructor with: Variable Introduce method {0} in {1} Override Equals() and GetHashCode() Add interface {0} Add operator overloads Add ${otherMethod} override Surround with #region Override ToString() Select the fields you want to use in the ToString() implementation: Resolve attribute: {0} Resolve extension method {0} Check current project with StyleCop Check with StyleCop Source Analysis Add to ignore list Blame blame/praise/annotate- show author for each line of code in the file Branch/tag Shows the dialog for branching/tagging The file/directory cannot be copied because it is in subversion status '{0}'. The file/directory cannot be moved because it is in subversion status '{0}'. The file/directory cannot be removed because it is in subversion status '{0}'. Check for modifications Command to check a directory for modifications (both local and remote) Checkout Download source code from the version control server Clean up Runs svn cleanup, fixing problems in the working copy Commit Command to upload local changes to version control system Create patch Create a patch file containing the local modifications Delete directory Diff Command to show local modifications done to a file Edit conflicts Command to edit version-control conflicts in a file Error deleting ${File} Message shown when a file or directory cannot be deleted Export Export files from the local working copy Force delete History '{0}' was removed from the ignore list. Get lock Mark conflicts as resolved Command to tell version-control system that conflicts were resolved Merge Merge changes from another branch to this directory Automatically &add new files Automatically &delete removed files &Re-load project after changes to project file(s) &Rename files inside Subversion (keeps history) Subversion Options Title of the subversion options panel Show &history tab for version-controlled files Show tab page History for each version-controlled file Relocate Change the URL of the version control server Remove from ignore list The file has just been moved to this location, do you really want to remove it? Repository browser Launch a tool to view the repository of the version control system Revert Command to revert local modifications done to a version-controlled file The file has local modifications. Do you really want to remove it? Revision graph Show the revision graph for a directory Save files Button text to confirm saving all open files Show Log Shows the history for the file The version control operation would affect files with unsaved modifications. You have to save those files before running the operation. Switch Switch the working copy to a different branch TortoiseSVN needs to be installed to execute this action. Update Command to download changes done by other developers to the working copy Update to revision Command to update a file to a specific version Thank you for participating! You can still opt-out later using the SharpDevelop options. text that confirms the user accepted UDC I would like to participate - collect and upload usage data Option to start participating in usage data collection You can still opt-in later using the SharpDevelop options. Text that confirms the user declined UDC I do not want to participate Option for declining to participate in usage data collection We need your help! To improve SharpDevelop in the future, we would like to know which features are used most. SharpDevelop can collect this information and upload it automatically. introduction to UsageDataCollector, appears on first start of SharpDevelop 4.0 Privacy Statement text for link to privacy statement Show collected data button for showing the data collected so far Usage Data Collector title of the usage data collector start page message (only visible on first start of SharpDevelop 4) and name of the corresponding page in the options dialog Let SharpDevelop figure out the type based on the initializer. Edit grid columns and rows Extract properties as style No valid element selected! Property/Event Name The selected control has already a style assigned. Do you want to replace the style with the newly created style? Style name: Property Value Group into Remove margin Remove unnecessary attributes <new event handler> Code completion Event color: Event handler name pattern: Select the colors that should be used by the XAML highlighter: Highlighting Ignored element color: XML namespace declaration color: Property color: Switch to code after insertion of new event handler XAML Use markup extension completion Use advanced highlighting The file cannot be saved with the current encoding ${encoding} without losing data. Continue continue using the current encoding (may cause data loss) Save as UTF-8 Project is configured as dll and no execution command is specified. You can specifiy an execution command in the project options. Compiling single files is not supported, please create a project! Description File About Version: Cast &Copy Object Copy T&ext Copy &Value Text Cu&t Object &Event Logging On Design Surface &Paste Object Refresh COM Running Objects Register TypeLib Remove from Favorites Unregister TypeLib Opened Assemblies Error attaching to process {0}. Process Labels a running process Attach Cannot find type Cannot find type {0} in any of the assemblies currently open. Cast for Cast Cast to Error determining type of cast. Remember cast across sessions? Cast type incompatible with object's type. Component Categories Classes Interfaces COM Running Objects Favorite/Recently Accessed Type Libraries Type Libraries If you select a constructor with parameters, after you hit OK, please fill in the parameters and then drag the selected constructor to where you want this object to be created. Select a Constructor Controls Create O&bject Application Working Directory ActiveX Converted Assemblies Directories Automatically Get COM Properties Get COM Running Objects at Startup Other Show base class names Show Show Object members in base class category Public members only Less Information More Information Report as Bug Clear &All &Clear Event Events Being Logged Event Log Inc You are not logging any events. To begin logging events, select an object or an event in the Objects panel, and either right-click or use the Action menu to enable event logging. Parameters Stop &All Logging &Stop Logging Time All levels Assemblies/Types Contains Find Find In Find what: Item Full Name Only down Levels Looking at: Match No items found Please Select Tree Node You must select a node in some tree; the find will begin with that node. Name Object Tree Value Please Select Name/Value Please select one or both of Name or Value when searching the Object tree. You must select a node in the {0} tree; the find will begin with that node. Show Item Starting with: Starts With Find Culture Global Assembly Name &Open Public Key Token Version Automatically get COM properties Get COM running objects at startup Panels Show Assembly Panel Show Controls Panel Show GAC Panel &Get Property The Inspector can view or manipulate any ActiveX/COM object. Browse the COM running objects using the object tree at the left. Right click a member of the object tree to invoke a method. Browse through the installed COM components in the ActiveX/COM tab. Open a type library or control file using the Open menu. To create/manipulate a ActiveX/COM object, drag a class within a TypeLib/Control to the object tree or design surface. Show this Dialog Getting Started Control Design Surface Design Mode Close &Assembly... &Find... Object Tree &Open Assembly... Type Handlers Invoke &Method &Inspector Objects Output Parameters Top Level Objects Value &Action ActiveX Files Assembly Files &Tracing... &Directories... &Object Tree... Select a File to Open &Options &Panels... &Help... &Tracing... &Type Handlers... Categories When number of members exceeds Integers in hex Show base class categories Base class members Base class names Events Fields Show Show member categories Show Members Methods Show Object members in base class category Properties Property/Event accessor methods Public members only Output select object (separate strings with spaces) value Adding COM Running Objects Please wait while I add COM running objects Getting {0} Information Please wait while I get the {0} information Loading Remembered Assemblies Please wait while I load the previously opened assemblies. Registry Set &Field &Set Property Component Inspector Set Trace Level Trace Level Name Type handlers present the classes marked below in a more convenient manner, suppressing unnecessary details. Waiting for application to start. If the application fails to start (or you become tired of waiting), you may cancel by pressing Cancel. Waiting for Application to Start Code Quality Analysis Automatically format code (default) (global) No formatting preset selected! Are you sure that you want to reset all previously defined formatting options? (project) Reset to: (solution) Insert reference to explicit method; press tab or enter again to insert a new method stub. Insert anonymous method without parameters. Insert anonymous method with parameters. About SharpDevelop Version Build Released under the terms of the ${License}. Version Info &Copy Version recent files recent projects &Discard all Save &all &Save Add Project Configuration Add Project Platform Add Solution Configuration Add Solution Platform You cannot delete all configurations/platforms. Do you really want to remove '{0}'? Copy &settings from: &Create this configuration in all projects Duplicate name. Edit Project Configurations Edit Project Platforms Edit Solution Configurations Edit Solution Platforms <Empty> Copy from empty item Enter the new name: The name was invalid. Go to Title of the "go to" dialog window Go to line Please enter an expression to jump to. You can enter line number, class names and file names. Examples: "120", "MainClass", "Main.cs, 120". Background color Bold Foreground color Italic Underlined Export highlighting colors Import highlighting colors Settings version not supported! This will reset all existing customizations and then import the selected file. Do you want to continue? Value Reset all to default Sample text If you want to use the new file in the current project, you need to add it to the project. Do you want to add the new file to the project ${CurrentProjectName}? Create file inside project Answer 1 Create standalone file Answer 2 Add file to project? &Categories: New File &File Name Fill out properties first To create this file you need to specify some property values first. Currently selected project file {0} has the readonly attribute set. The new file will not be added to the project. &Templates: Create &directory for solution New Project &Location: &Name: Project will be created at &Categories: Error parsing regular expression: Find &all &Find Find &Find next Fi&nd what: Include su&b-folders Look at these file &types: all open documents current document current selection The directory '{0}' does not exist. Select directory to search in whole project whole solution &Bookmark All Match &case Match &whole word Replace &all &Replace Replace Replace with: &Look in: Regular expressions Standard search Wildcards Search string not found! Not found Search and Replace Us&e: Select the directory in which the project will be created. Solution Na&me: &Templates: Buffer Options A&dd new Group Description Please enter the list of file extensions as a semicolon-separated list. (Example: .h;.c;.cpp) &Edit extensions Edits the list of file extensions associated with a code snippet group &Description Edit Template &Template E&xtensions Keyword mapping Press Tab to insert this code template. Appears in description box in template completion. Re&move Group Template Code Templates Configuration Configuration Editor Title of the solution configuration editor dialog <Edit> Platform &Solution configuration: label in front of combo box where the build configuration (Debug/Release) of the solution can be chosen &Arguments &Command &Prompt for Arguments &Solution directory Solution file name Current column Current line Current text &Item directory Item Path Target Path Item extension Item file name &Project directory Project file name #Develop Startup Directory &Target directory Target extension Target Name &Title &Tools Use &Output Window &Working dir External Tools Clear cache Show completion list after a character is typed Code completion detail settings The following options are language-dependent, some options are not available in some programming languages. Use the following option to turn code completion completely off: Text in label above the "Enable Code Completion" checkbox. Re-open tooltip with better overload when pressing comma items Save *inputbox* items Save Save *inputbox* items Links in tooltips should go to Definition in code Documentation (if available) Pre-select recently used members Only in debug mode Show tooltip when writing method calls Trigger code completion after keywords Show tooltip when moving mouse over expression &Insert blank lines between members Code generation options Comment generation options &Else on same line as closing bracket Generate &additional comments Generate &documentation comments &Start code block on the same line Code Generation &Use full type names Coding Debugging The root node in the options dialog Ask for arguments and working directory on executable launch. Break at first line of execution. Enable decompiler Enable Edit and Continue Exceptions Pause on handled Exceptions Stepping Decompile code without symbols Use 'Just My Code' feature for stepping Step over all properties Step over code marked with debugger attributes Step over field access properties Step over code without symbols Step over single-line properties Suppress JIT optimization Suppress NGEN optimization Symbols Symbol and source code paths: Without Source Debugging &Header &Language Edit Standard Headers General &Auto-load changes if saved (checkbox) automatically load externally changed files if there are no unsaved modifications in SharpDevelop Use &temporary file for saving Default file &encoding: Default encoding used for new files &Detect external changes to files Load &Load user-specific settings with the document Load/Save Save Unix (LF) LF = line feed Line terminator style for 'unix' like oprating systems. I don't think that this needs translation. Use &recycle bin when deleting files Windows (CRLF) CRLF = carriage return, line feed line terminator style for the 'Windows' operating system. I don't think that it needs translation. Format Output Window Word wrap Build and Run options Invalid project path specified. Load previous solution on startup Projects and Solutions Number of projects to build in parallel: Default project location: Select default project location Settings Show error list pad if build finishes with errors When running: option that specifies how to build when running the project Build modified projects and projects depending on them Build modified projects only Do not build Build all projects Current UI language: Click on an icon to choose language. UI Language Select your preferred &ambience: Show file &extensions in the project scout &Show status bar Show &tool bar Use blue style (Office 2003-like) for menus and toolbars. Prefer project's ambience if possible Appearance Appearance Comment Tags &Name Task list &Token list Behavior &Can move caret behind EOL C&onvert Tabs to Spaces Use Ctrl+Click for "Go to Definition" Checkbox for enabling Ctrl+Leftclick as shortcut for 'go to definition' A&uto insert curly braces Cut or Copy entire line when nothing is selected Enable virtual space &Hide mouse cursor while typing I&ndentation &Indentation size Automatic None Smart &Mousewheel direction Normal Behavior Reverse Tabs &Tab size &Automatic template insertion Use smart indentation Checkbox for disabling/enabling smart indentation Code Completion Title of the code completion option panel &Render font antialiased Enable Change Marker margin Enable &code completion Enable &doublebuffering Enable &folding Font File encoding Choose &encoding: Size: General Options M&ouse wheel zooming Show &Quick ClassBrowser Panel Text Font: at colum&n I've mixed up row and column. Column is right After Caret Before Caret Show caret line Enable animations Show &end-of-line markers Highlight &matching bracket Highlight current line Highlight symbols Show &horizontal ruler Show &invalid lines Line m&arker style Show &line numbers Full Row None Markers Markers and Rulers Rulers Show &hidden definitions (brackets only) Show &spaces Show &tabs &Underline errors Show &column ruler Enable automatic casing of keywords Enable automatic insertion of end constructs Code formatting VB specific options Text Editor Tools Console Application Class Library .Net Module Windows Application Select the directory in which the assembly will be created. Highlighting Options General Application Application i&con: Assembly &name: {0} is not a valid icon file. Error message displayed when the user tries to set the application's icon to a file that is not an icon. Application &manifest: Do not embed manifest Embed default manifest Manifest files File filter description for *.manifest files Output name: &Output type: Project &file: Project folder: Project Information &Root namespace: &Startup object: Win32 R&esource File: Advanced Auto Base Intermediate Output Path: Debug &Info: DLL Base Address: Errors and Warnings &File Alignment: &Generate serialization assembly: Intermediate Output Path: Off On Output &Output Path: &Register for COM Interop &Suppress Warnings: &Target CPU: Any processor Any processor (prefer 32-bit) Any processor (prefer 64-bit) Intel 64-bit Itanium processor x86-64 processor AMD 64 / Intel 64 processor 32-bit Intel-compatible processor Target Framework: Treat Warnings as Errors A&ll &None Sp&ecific Warnings: &Warning Level: &XML documentation: Build Events P&ost-build event command line: P&re-build event command line: &Run the post-build event: Compiling Allow &Unsafe code &Check for arithmetic overflow/underflow Con&ditional Compilation Symbols: General Do not reference &mscorlib.dll O&ptimize code Remove integer overflow &checks Default values for VB Options: Code Formatting &Configuration Configuration-specific Changing the configuration will save the current values. Continue? Debug Co&mmand line arguments: Start Action Start browser in &URL: Start Options Start e&xternal program: &Start project &Working directory: Full debug information No debug information Only .pdb files There are no project options panels installed for this project type. Platform Platform-specific Please enter a valid number. Imports &Add import &Namespace: &Remove import Project-wide Imports Publish Reference Paths &Add path Always When the build updates the project output On successful build Select folder Description for folder selection dialog Signing Change Pass&word... Choose a strong name key file: ClickOnce signing ClickOnce signing is currently not supported. Con&firm password: &Enter password: Key file &name: Create Strong Name Key &Protect my key file with a password Dela&y Sign only When delay signed, the project will not run or be debuggable. You have to enter a key name. There was an error creating the key file. The entered passwords do not match. The password should be at least 6 characters long. Sign the &assembly sn.exe was not found. Make sure the .NET Framework SDK is installed on your computer. Strong name signing With the small button in front of each configuration setting, you can choose where a setting is stored. Configuration-specific means the setting can have a different value in each configuration (Debug/Release). Platform-specific means the setting can have a different value on each platform. You can also choose to store the setting in the .user-file instead of the project file, so every developer can use a different value without getting conflicts in source control systems. Store in .user-file Add Interface to Class Generated Name Include Comments Interface Name New File Name Select Public Members Create new class: The method cannot be created directly, because no source code of the class is available. Please select a static class where the method will be created as an extension method. Introduce method Use existing class: .NET Assembly Browser Add Reference Choose specific assembly version Reference Name Version GAC Location Project Directory Project Name Projects Reference Name Selected References S&elect Type Finish Chars Word Count file The current file is not a text file and cannot be counted. &Count where Lines You must be in project mode &Start total Words Can't find ${Executable} in any of the SDK bin folders. Message for an exception that is thrown if a sdk executable cannot be found. Can't load ${File}.File not found. Error while loading Error while saving The file is too large to be opened. Please correct all source code errors before designing Design Source Abort &Add Advanced < Back &Browse... Browse text for buttons that open a dialog for searching a file/folder Cancel &Change Choose location &Close Create Delete &Delete Unselect All The words "Unselect All" translated into the local language. &Edit Error The file '{0}' already exists. File name Finish Finished Folder Font Style Custom Choose custom color Select font Underline &Help ID Abbrevation for Identifier Ignore Large Icons all open files current file Directories whole project Move &Down Move &Up N/A Stands for 'Not applicable' Name Next > No OK &Open Options The word "Options" translated to a particular language. Path Please wait... Preview Question readonly The word "readonly" in lowercase. Refresh &Remove Re&name Replace Retry Select &All selects all items in a list Small Icons Start Line &Update Warning Yes Yes to All File or directory name is already in use, choose a different one. The file name you have chosen contains illegal characters. Please choose a different file name. Open verb for opening an item (usually file) Open Folder in Explorer Command that opens the selected folder in Windows Explorer Open With... Open file with non-default tool Add program &Display name: &Program: Use the default Windows application for this file Icon editor Resource editor Text editor Text editor (choose encoding) Entry in "open with" menu for explicitly choosing the file encoding when opening a text file Built-in Web Browser XML editor Choose the program you want to use to open this file: Default Open With Set as Default Show all files Add new string resource to {0} <Add new> Do you really want to delete all ${Count} selected resource keys from the resource files and all dependent localized resource files permanently? Do you really want to delete the resource key "${Key}" from the resource file "${FileName}" and all dependent localized resource files permanently? Edit string resource A resource key with this name already exists! Resource key must not be empty! An error occurred while processing the resource file '{0}'. Find missing resource keys Find unused resource keys Key Resource key: The resource key "{0}" could not be found in file "{1}". References to missing resource keys References to ${ResourceKey} (in ${ResourceFileName}) The definition of this resource key could not be found and renamed. Enter new resource key name: The selected resource is not of type 'string' and cannot be edited. Add this resource Edit resource Resource Toolkit <KEY NOT FOUND> Value to display when a resource key is missing Resource in {0}: Object of type {0}: <Unknown> Hide ICSharpCode.Core host resources When selected, resource keys that are contained in the resource file of the ICSharpCode.Core host application are not listed. No unused resource keys were found in the whole solution. Unused resource keys Value Resource value: Press Ctrl+Space to show items from all namespaces Boo Interpreter Title of the Boo Interpreter pad SharpDevelop cannot find FxCop. Please select the FxCop installation directory in the SharpDevelop options. Cannot read FxCop log file: Mono is not installed. Running Code Analysis... Unknown Target Mono Framework Version: Code Analysis Check current project with FxCop Check with FxCop The selected directory does not contain a complete FxCop installation. Select FxCop path Button to select the FxCop path FxCop was found in the following directory: FxCop could not be found. Install FxCop and click on 'Select FxCop path' to tell SharpDevelop where you installed FxCop. FxCop path Title of FxCop path choosing groupbox Add/Remove rule assembly Cannot find FxCop - Make sure FxCop is installed. Choose directory containing rule assemblies: &Enable Code Analysis (defines CODE_ANALYSIS constant) Loading available rules... &Run Code Analysis when compiling (defines CODE_ANALYSIS constant) You can specify the path to FxCop in the SharpDevelop options. Mixed Warning or Error Rule Running FxCop on Suppress message Context menu command to suppress a code analysis warning Code Covered One of the display items that exists in the Code Coverage Options Panel. Selecting this one allows the user to configure the colours for the code that has been covered by the unit tests. Code Not Covered One of the display items that exists in the Code Coverage Options Panel. Selecting this one allows the user to configure the colours for the code that has NOT been covered by the unit tests. Code Partially Covered Column List view column header holding the code coverage start column number. Content Display Options End Column List view column header containing the end column number for the code coverage. End Line List view column header containing the code coverage end line. No code coverage results file generated: Error message added to error list pad when the code coverage results file was not generated. Code Coverage Colors Group box title containing the text colors to use for code coverage highlighting. &Display Items: Code coverage options label that indicates the different text display items that can have their colours configured. Item bac&kground: Label for the code coverage text background colour. Item fo&reground: Label for the code coverage item's foreground colour. AaBbCcXxYyZz Sample text that is displayed when showing the code coverage colours selected. Exclude Include Running code coverage... First line of text sent to output window when running code coverage. Show Code Co&verage Show Source Code Show Visit Count Toggle Code Coverage Tooltip for button that shows/hides code coverage highlighting in the source code. Visit Count Column header in code coverage list view which indicates how many times a particular line of code was visited when running the tests. Description Exception got Show Exception Additional options Linker Link additional files Link specified .NET modules Generate debugging info Library files locations Embed .NET resource file Preprocessor Define following preprocessor symbols Header files locations Undefine all defined preprocessor symbols Undefine following preprocessor symbols Symbol .NET Resource File (binary) C# Source File Java Source File Project .NET Resource File SharpDevelop Solution VB.NET Source File XML Document Unable to find NAnt '{0}'. Please configure the NAnt executable's location in the SharpDevelop Options. NAnt build stopped. Message sent to Output window after the NAnt process has been successfully stopped. Project does not contain a '.build' file. Error message reported to the user when they attempt to run NAnt when there is no .build file in the SharpDevelop project. Running NAnt. Message sent to the Output window indicating that the NAnt build is about to be started/run. This will terminate the NAnt process. Are you sure? Message displayed to the user if they select the "Stop NAnt" menu option. Create &Build File Menu option to create a NAnt build file. &Goto Definition NAnt pad right click menu option which will open up the .build file and put the cursor on the specified NAnt target. &Goto Error NAnt pad right click menu option - when an error tree node is selected the build file is opened up and the cursor is moved to the error. &Arguments Label for the NAnt command line arguments text box. Build File Generation Options panel. Name of the group containing NAnt build file generation configuration. &Command Label for the NAnt command line textbox. &Debug Checkbox label for NAnt's "debug" command line option. NAnt Configuration Options panel. Group box for NAnt config options. NAnt &Version Label for the drop down list containing NAnt version numbers. &Quiet Label for the NAnt "quiet" option checkbox. Show &Logo Check box text for NAnt's show logo command line option. Ver&bose Checkbox text for NAnt's "verbose" command line option. Enter NAnt properties. Text tooltip shown when the user moves the mouse over the TextBox at the bottom of the NAnt pad. This area is used to enter ad hoc command line options or properties when running NAnt (e.g. "-D:optimize". Reloads the build files Tooltip for the Refresh button in the NAnt pad. Refreshes the pad's view from the build files in the combine. Runs the selected target Tooltip text displayed when the user moves the mouse over the NAnt pad's run button. The button runs the NAnt target selected in the tree view. Stops the current build Tooltip for the NAnt pad's stop button. Will stop the currently running build. No process running. Attempted to wait for a process to finish but the process is not running error message. Run &Clean Target Menu option to run NAnt to call the build file's "clean" target. Run Default &Target Menu option that runs NAnt to build the build file's default target. Run &Target NAnt pad right click menu option to run the selected NAnt target. &Stop NAnt Menu option to stop the currently running NAnt build. There is no startup project to debug. Unit Tests All Drop down list option indicating "All" the languages should be returned. Insert PInvoke Signature Insert PInvoke signature dialog title. Find Find button text. Finds the matching pinvoke signature for the given search criteria. Function: Label for drop down list of PInvoke/Dll methods/functions (e.g. MessageBeep, CreateProcess). Insert Insert button text. Inserts pinvoke signature into source code. Language: Label for the drop down list of source code languages (e.g. C#, VB). Module: Label for drop down list of modules/dlls (e.g. user32) More info Hyperlink label that the user can click to get "more information" on a particular pinvoke signature. No signature found for language '{0}'. Error message returned when no p-invoke signatures found for the particular language (C# or VB). No signatures found. Error message indicating that no P-Invoke signatures were found for specified search criteria. Insert PInvoke signatures... Menu option that shows the "Insert PInvoke signatures" dialog. From C# to Python From VB.NET to Python Python Console interactive python interpreter Python Files file filter for *.py files Python Project Files file filter for *.pyproj files Send Line to Python Console Sends the line under the cursor in the text editor to the IronPython console window. Send to Python Console Could not find type '{0}'. Are you missing an assembly reference? The selected element is not a class or overridable member, so no derived symbols can be shown. Error message when using 'Search>Find Derived Symbols' when it isn't applicable. Could not find type definition at the cursor position. Error message when using Search>Find Base Classes when the cursor is not on a type reference. Could not find type definition or type member at the cursor position. Error message when using Search>Find Base Classes when the cursor is not on a type reference or type member. Send Line to Ruby Console Send to Ruby Console Can't load file ${FileNameWithoutPath} under ${Path}. Check the file permission and the existence of that file. Can't save file ${FileNameWithoutPath} under ${Path}. Choose another file name or check if the directory exists and that you have write permission in that path and file. (maybe a write protection problem?) Browser From C# to VB.NET Debug layout Default layout <Edit> Add layout Edit the list of user-defined layouts: Edit layouts Plain layout <Reset to defaults> Are you sure that you want to reset the layout configuration ? Note: This doesn't affect own custom layouts. Convert Menu item in project conctext menu Subitems: Convert to VB Convert to c# Conversion complete. Conversion Results ${ErrorCount} error(s) converting ${FileName}: Correct source code errors first (only correct source code would convert). ${FileName} is not converted: Parser found ${ErrorCount} error(s) SharpDevelop Project Converter Source directory {0} already exists, cannot convert. Target directory From C# to Boo From VB.NET to Boo Can't open file '${FileName}'. It is no valid solution or project file. SharpDevelop loaded the solution '${SolutionName}', but it does not contain the project '${ProjectName}'. Add '${ProjectName}' to '${SolutionName}'. Create new solution for '${ProjectName}'. Couldn't create PrintDocument A write protected file with this name already exists at this location. Appears when the user tries to add a file to the project that already exists and is write protected. No backend for project type installed. Project browser node text for unknown project types. The project file cannot be found. Project browser node text for missing project files. References Unable to read web service description. Url='{0}' Error message displayed when the user tries to refresh the web service proxy code, but for some reason the server hosting the web service is unavailable. Solution Items Folder containing files associated with the solution Solution Text of root node in project browser The file can not be found anymore. Are you sure that you want to reload the file ? All changes get lost. Language binding ${LanguageBinding} can't compile ${FileName}. File saved File name '${FileName}' is invalid. File Saved Navigate to file in project browser From tab strip (tabs above editor), allows to navigate (expand and scroll) to given file in project browser (i.e. solution explorer) From VB.NET to C# (+${NumOverloads} overloads) ${CurrentMethodNumber} of ${NumberOfTotalMethods} The file ${File} has been changed externally. Do you want to reload it? Incremental Search: (not found) (passed end of document) Reverse Incremental Search: {0} is not a valid .NET assembly. {0} is not accessible or doesn't exist anymore. Error loading code-completion information for ${Assembly} from ${Filename}: Continue Copy error message to clipboard Exit SharpDevelop An unhandled exception has occurred in SharpDevelop. This is unexpected and we'd ask you to help us improve SharpDevelop by reporting this error to the SharpDevelop team. How to report errors efficiently: We have set up a Web-based forum to report and track errors that are reported by users of SharpDevelop. To minimize necessary questions by the team members, in addition to providing the error message that is copied to the clipboard for easier pasting in the error report, we ask that you provide us with an as detailed as possible step-by-step procedure to reproduce this bug. When translating this message, add a notice that error reports should be done in English. Do you really want to quit SharpDevelop? Unsaved changes will be lost! Report Error to SharpDevelop Team Thank you for helping make SharpDevelop a better program for everyone! Unhandled exception has occured Can't deserialize form. Possible reason: Initialize component method was changed manually. Can't create root designer for component '${RootComponent}'. Root designer does not support Windows Forms view technology. Error loading designer: Assembly Location Namespace C&omponents to add Custom Add Components Please enter a valid file name. Please enter the file name of a valid .NET assembly. Version GAC The assembly ${Name} does not contain any components. &File Name &Add Components Assembly Categories Configure Sidebar Namespace &New Are you sure to remove this category? Re&move Components Are you sure to remove the selected components from the category? R&ename Import... Local resource Text of the radio button to select a local resource (which will be stored in the resource file of the form being designed) None Text of radio button to select no resource Preview Title of the image preview box in the image resource editor dialog Project resource Text of radio button to select a project resource (which is stored in a resource file in the current project) Select resource Title of a dialog in the Windows.Forms designer that allows selecting a resource for an image property Generated code mark InitializeComponents method in code view as readonly General Generate Visual Studio Style Event Handlers Grid Properties &Height Enable in-place editing of ToolStrips Use optimized code generation Grid Options Property pad settings Sort properties alphabetically &Show Grid Automatically open Smart Tags Use Smart Tags Snap Lines Align Mode S&nap to Grid Snap to Grid &Width Insert "TODO" comment in new event handlers Property assignment (fast for small number of properties, but scales poorly for large numbers of properties) Default localization model Leave localization model of existing forms unchanged Localization Model Property reflection (slower at runtime for few properties, but scales better for large numbers of properties, especially with many default values) Windows Forms Designer &Category Name Duplicate name, please choose another one. New Category Rename Category &Show Components You're trying to add a component which will result into a cyclic dependency. Exception while creating the component for the Forms Designer (a component has thrown an exception in the constructor). THIS DOES NOT AFFECT THE SOURCE CODE. Failed to load designer. Check the source code for syntax errors and check if all references are available. One or more errors occurred while trying to flush the designer content. This might be due to an unhandled exception in a custom/third-party component on the form/control. Message displayed when errors occur while flushing Can't load side bar component library. No Windows Forms components will be avaiable, please configure the side bar manually. (right click on a side bar category->Customize SideBar) Custom Components False True Back Add web reference back button tooltip. Binding Property name for a web service port binding. Add Web Reference Title of the Add Web Reference dialog. Documentation Property name displayed next to the web service documentation text. Forward Tooltip for the browser forward button. Go Tooltip for browser's go button. The namespace contains invalid characters. A namespace can only contain letters, digits or underscores. Shown to the user if they attempt to create a web reference where the namespace has invalid characters. Reference name contains invalid characters. Error message shown when the web reference name entered by the user is invalid. &Namespace: Label next to the namespace text box that will be used when generating the web proxy code. Parameters Text displayed next to web service parameters when the user selects the web service node. Property Title of list view column showing the names of various web service properties. &Reference Name: Label next to the text box containing the name that will be used for the web reference. Refresh Add web reference dialog browser refresh button tooltip. Retrieval URI Text displayed in the property/value list when the user selects the service description list view node. Service Displayed next to a web service name when the user selects a web service node in the list view. Stop Tooltip for the browser stop button. &Address: Label next to text box where the user types in the http url to a web service description. Value Name of list column header showing web service property values. Available Web Services Title for the tab that shows the web service operations available for a given url. Attach Managed Indicates that a process is managed code in the attach to process dialog. Attach to Process Can't create output directory. Check if you've the required permission. Illegal project name. Only letters, digits, space, '.' or '_' are allowed. Illegal project name: project name may not end with '.'. Illegal project name: project name must start with letter. You must specify a valid absolute path as project location. Error message when location for new project is invalid &Select the file types you want to associate with SharpDevelop: File Format Associations &Register file types at application startup &Case sensitive Sort Options &Ignore trailing whitespaces &Remove duplicate lines Sort Direction &Ascending &Descending Tool not found Title of dialog window that appears when an external tool (SHFB or TortoiseSVN) is missing Discovery Credential UserCredentials dialog title. Dialog pops up when the user needs to specify username/pass to view a web service. &Domain: Please supply the credentials to access the specified url. &Password: Url: &User name: Outline Document outline pad Outline view is not available for the current document. Loading... &Reset &Show Description Reset failed. Reason: Reset value might now be invalid because another property changed. Parsing Status bar message indicating that SharpDevelop is parsing the user code Build action The build action of that file Copy to output directory Specifies if the file should be copied to the output directory Custom Tool Specifies the tool that converts the file to the output. Custom Tool Namespace Specifies the namespace the custom tool places it's output. The full path to the file. Description shown for the 'File name' property in the property grid when a file is selected in the project browser. Logical Name Logical Name property for embedded resource files The name of the embedded resource. If left empty, the name is automatically generated. Aliases A comma delimited list of aliases. Use aliases if you need to reference assemblies with conflicting class and namespace names, e.g. different versions of the same assembly. Culture Reference's culture property. The culture supported by the reference Reference's culture property description. Embed interop types Used in properties pad when a COM reference is selected. Specifies whether COM interop types defined in the referenced assembly are embedded into the target assembly. Local copy If true the referenced assembly is copied to the output path (Name) Property value for the reference name. Keep the () brackets so that this property appears at first (i.e. at the top of the property list). The reference name Property value description. Public Key Token Assembly reference's public key token property. The public key token Assembly reference's public key token property description Reference assembly 'Reference' is a verb in this case. This string appears in the property pad when a project reference is selected in the projects pad. It is a boolean option that defaults to true. If set to false, this reference specifies only a build-order dependency and does not cause the assembly to be referenced. If set to false, this reference specifies only a build-order dependency and does not cause the assembly to be referenced. Specific Version Reference property name indicating if the reference is to a specific version Indicates if this reference is bound to a specific version of the assembly Reference property description. URL Behaviour Web reference url behaviour property displayed in property browser. Web reference URL behaviour Property description for web reference url behaviour . Version Property name indicating the assembly reference version number. The major, minor, revision and build numbers of the reference Reference's version property description. Web Reference URL Name of property showing the web reference's url. Web reference URL Property description for the web reference url. Solution file ${combineLocation} already exists, do you want to overwrite the existing file? Can't create project with type '${type}'. File ${fileName} could not be written. Project file ${projectLocation} already exists, do you want to overwrite the existing file ? The File(s) ${fileNames} already exist, do you want to overwrite the existing file(s)? File(s) already exist Loading ${Filename}... Close solution Keep old solution open Button text to keep old solution open Reload solution Button to confirm reloading the solution after project files were changes The solution has been changed externally. Solution Formatting Options Convert selected &projects to: Change &target framework: Change version of selected projects Title of group box that allows changing the version of the selected projects Compiler Version &Convert <do not change> item in compiler version/target framework combo boxes that is used to indicate an ambiguous selection (several projects with different targets frameworks) and allows the user to change one of (compiler version, target framework) without changing the other Target Framework Project Upgrade The project '${ProjectName}' is targeting MSBuild ${OldToolsVersion}, but that version is not installed. Do you want to upgrade the project to MSBuild ${NewToolsVersion}? The project cannot be opened without upgrading. Upgrade to MSBuild ${NewToolsVersion} OK button for UpdateOnLoadDueToMissingMSBuild message box This solution was created using a previous version of SharpDevelop. You might want to upgrade it so that you can use new language or framework features. Current ambience not found. Goto 'Options->Visual Style' and change the current language ambience. Mark all done. ${Count} replacements done. All Tests Unit Tests tree root node text when a solution contains multiple test projects. Code Coverage Create XML output file Label each test Shadow copy Show logo Show progress Run tests on separate thread Run all tests with code coverage Run in unit test pad Run tests in current project Run with code coverage Run with debugger Testing ${Name}... Label next to the progress bar in the status bar when running unit tests &Test The "Test" submenu in the "Analysis" menu Unable to run unit tests. The file '{0}' cannot be found. Web Application already exists. Create application/virtual directory Disable web server options Local IIS or IIS Express was not found. ASP.NET/IIS (Express) worker process ({0}) was not found. There is no external program or URL specified. Check the web server at Project Properties - Web tab. Server port: Project Url: Web Server Debugger was unable to attach to process. Use IIS Express Web server Use local IIS Web server Application/virtual directory was created. Add Extensions WiX Extension Files WiX Library Files Output name: Output filename: Extensions Cultures: Suppress ICEs: Treat warnings as errors: WiX MSBuild extensions path: WiX targets path: Wix tasks path: WiX tool path: WiX Variables: Could not find dialog id '{0}' in the document. Error message displayed by the forms designer when for some reason it cannot find the dialog id in the document. An extension must be of the form: Class, Assembly For example: Microsoft.Tools.WindowsInstallerXml.Extensions.NetFxCompiler, WixNetFxExtension Library Linking Name Value Add Directory Add files... Unable to find setup files. WiX files contain errors. Unable to find any TARGETDIR Directory or DirectoryRef elements. Either these do not exist or the WiX document is not for WiX 3.0 and the namespace is not "http://schemas.microsoft.com/wix/2006/wi". No WiX file (.wxs) found in '{0}' project. Setup Files Add Directory... Add Files... Preprocessing Add WiX Extension Add WiX Library Menu item to add a Wix Library (wixlib) to a Wix project. Installation Package Merge Module WiX Library Setup Dialogs Unable to find '{0}' in {1} {0} = Dialog id. {1} = Filename. The full string will be: Unable to find 'WelcomeDialogId' in Dialogs.wxs Add... The {0} attribute's value, '{1}', is not a legal integer value. Required attribute '{0}' is missing. Error message specifying the xml attribute that is required but missing in the Wix dialog xml. No setup dialog selected in Wix document. Please move the cursor inside a dialog element or use the Setup Dialogs window to open a dialog. Admin Tools Application Data Common Application Data Common Files 64 Common Files Desktop Favorites Fonts Local Application Data My Pictures Personal Program Files (x64) Program Files Program Menu Send To Start Menu Startup System (x16) System (x64) System Temp Templates Windows Volume WiX Extensions WiX files Name of file filter for WiX files. WiX Libraries WiX Localization Files .NET Framework Extension WiX is not installed. Please download WiX from http://wixtoolset.org/ No difference found. Message displayed in the Wix diff control to indicate that no differences between the files specified in the Wix setup document and the files on the file system were found. WiX Project Title displayed in the File Format Associations options page for Wix projects. WiX Project Files Name for the WiX Projects file filter in the File Open dialog. COM+ and Message Queue Extension (pubca) WiX Targets File WiX Tasks File Visual Studio Extension WPF Designer Thumbnail View Copy Cut Outline Paste Properties Redo Remove Tools Undo View XAML Custom: Add Attribute Custom: Add Element &Assign XSLT... Assign XSLT Stylesheet &Create Schema Menu option that creates or generates an simple xml schema from the xml file currently displayed. Hide &XPath Results Menu item that is used to remove the highlighting on items matched by the XPath query. &Open XSLT Run XSL&T Select XML Schema Name of dialog allowing the user to choose a schema from a list of schema namespaces. Dialog is opened when the user is associating a schema with a file extension. &Validate XML Menu option to validate the xml file currently open. Folding Name of the group label that holds settings for xml folding. Show &attributes when folded Check box label - shows/hides xml attributes when the element is folded. Show schema anno&tation Check box label. Toggles on/off the display of xs:annotation/xs:documentation text, found in the schema, alongside the xml intellisense list. XML Options Name of the xml editor options panel. XML Completion Label for xml auto-completion/intellisense options group. &Extension: Label for a drop down list of file extensions. File Extensions Name of group box containing the file extensions and their associated schemas. &Prefix: Label for the namespace prefix (e.g. "xs") that will be associated with a given xml file extension by default. &Schema: Label for the schema namespace associated with a file extension. Schemas Name of xml schemas group box in the xml schema options dialog. Unable to add schema. The namespace '{0}' already exists. User tried to add a schema to SharpDevelop but one has been added before with that particular namespace. Schema '{0}' does not have a target namespace. For a schema to be added to the xml intellisense it must have a namespace associated with it. This error occurs when the user tries to add a schema 'filename' that does not have a targetNamespace attribute. XML Schemas Name of the options panel for configuring xml schemas that SharpDevelop will provide autocomplete/intellisense for. Unable to add schema. User browsed for an xml schema on the file system, but we could not add it to SharpDevelop for some reason. Unable to save changes. This message is shown if SharpDevelop could not save the changes the user made to the xml schemas options panel. Add Attribute... Add Child Comment Add Child Element... Add Child Text Node Insert Comment After Insert Comment Before Insert Element After... Insert Element Before... Insert Text Node After Insert Text Node Before Remove Attribute XML Tree The title for the Xml Tree tab. Namespace Namespaces XPath query found 0 items. Prefix Query Results XPath Query XPath: Match XSLT Output ILSpy could not be found at the specified location, or SharpDevelop does not have sufficient rights to access it. The path to ILSpy has not been set yet. Open ILSpy This feature requires ILSpy. If you do not have it yet, you can download it for free there: Full path to ILSpy.exe Set path to ILSpy Can't load external tools configuration file Can't load templates configuration file Error while loading project template: The build must finish before SharpDevelop can be closed. Warning message displayed to user if they try to close SharpDevelop whilst a build is running. Build was cancelled. Message when build was cancelled by user Build failed. Build finished successfully. Build started. ------ Build started: Project: ${Project} Configuration: ${Config} ------ Building Verb describing that SharpDevelop is currently building a project Compiling Verb describing that SharpDevelop is currently compiling a project Building COM interop assembly... Execute : ${Script} MSBuild is already running! Performing main compilation... Build complete -- ${Errors} errors, ${Warnings} warnings Skipped ${Name} (no changes inside SharpDevelop) Message when a project is not compiled because it was not modified SharpDevelop Do you really want to discard your changes ? local variable prefix for the tooltip namespace prefix for the tooltip parameter prefix for the tooltip on parameter definitions overload of Do you want to save the current changes? Save Changes in Compiling ${Project} Ready Delete all bookmarks in all buffers. DeleteAllMarks icon tooltip. Delete bookmark Enable/Disable all Goto next bookmark Goto previous bookmark {0} @line {1} format string for displaying "filename @line #" in the bookmarks pad Location Column title for the bookmark location Bookmarks Add to workspace Back Base types Show &Other Members Show P&rivate Members Show &Project References Show Pr&otected Members &Show Public Members Class View Settings Clear Search Search Derived types Forward No search results found. Open assembly Open assembly from file... Open assembly from GAC... Open in Class Browser Class View Search Workspace {0} Classes Clear All Show output from: Toggle Word Wrap Add watch expression Breakpoints Callstack You cannot switch functions while the debugger is running. You cannot switch to a function without symbols. You cannot switch to a function without debug symbols. Either recompile it with symbols or enable "Decompile code without symbols" in the options. [External methods] Show in the callstack instead of external methods (without symbols) Function switch Language Module Show argument names Show argument values Show external methods Show line number Show module names Ask Break Breakpoint Breakpoint hit! Hit breakpoint at line {0} in {1}. Hit breakpoint at line {0} in {1} because {2} Conditional Condition column title for a conditional breakpoint's condition Continue Disable breakpoint Edit condition... Opens dialog for editing breakpoint condition Enable breakpoint Check syntax Scripting language Edit Debugger Script Terminate Trace Console Debug executable Break Button. Breaks the execution. Shows the current location of debuggee in the editor. Continue Button. Continues the execution of debuggee. Button is enabled only for handled exceptions. Cannot intercept exception. Debugged program can not be continued and properties can not be evaluated. eg. Happens on StackOverflow exception. Cannot intercept handled exception. Debug symbols might not be available for the source of the exception. Hide Exception Details --- End of inner exception stack trace --- at {0} NB: Only used for exceptions that can not be intercepted (eg. StackOverflow) at {0} in {1}:line {2} NB: Only used for exceptions that can not be intercepted (eg. StackOverflow) An exception of type {0} was thrown: Show Exception Details Terminate Button. Stop/terminate the debuggee. Exception NOT USED Handled exception Unhandled exception Exception history Exception Time Show/Hide Zoom Control Local Local variables Base class Name of submenu which contains members of type's base class You cannot explore variables while the debuggee is running. Can not convert {0} to {1} Occurs when user edits value but enters value in a bad format Can not set value Can not set value Generic error. Occurs when user edits value. Copy value to clipboard Item in variable's context menu Name Non-Public members Non-Public Static members Private members obsolete Private Static members obsolete Show full error... Context menu item. Shown for values that could not be obtained due to error. Shows the full callstack of the error. Show values in hexadecimal Item in variable's context menu Static members Type Value Memory The address {0} was not found! Display bytes size: Jump to address: Next virtual addresses No mappings for memory addresses! Not debugging or process is running! Previous virtual addresses Reading from {0} to {1} - size {2}. Refresh current addresses Unable to read at address {0} of size {1}. Loaded modules Address (dynamic) No symbols loaded. Symbols loaded. (in memory) Order Program Symbols Timestamp Version Object Graph Parallel Stacks Run to cursor Set current statement Do you want to stop debugging? Detach from the process or terminate it? Threads You cannot freeze or thaw threads while the debugger is running. You cannot step because there is no active function selected You cannot switch to a thread with no available frame. You cannot switch threads while the debugger is running. You cannot switch to a thread in decompiled code without enabling decomplied code options. Freeze Frozen Priority Above normal Below normal Highest Lowest Normal Thread switch Toggle Method View Watch Add watch Enter an expression to watch: Invalid expression: {0} Refresh Remove all Remove watch Definition View Title of the definition view pad Errors ${TaskService.Errors} Errors Select whether errors are displayed in the list. ${TaskService.Messages} Messages Select whether messages are displayed in the list. ${TaskService.Warnings} Warnings Select whether warnings are displayed in the list. CD CD/DVD Fixed fixed drive => hard disk Remote Network drive Removeable removeable drive, e.g. floppy Last modified My Computer My Documents Size Files Help Outline There is no outline content available for this document. Output Build Debug Projects Properties Back to normal search results <Clear History> Menu command to remove previous searches Collapse all Expand all ${Count} files Flat in used like this: occurrences IN files <no project> ${Count} occurrences Occurrences of '${Pattern}' 1 file 1 occurrence Per file Per project Per project and file Select search list mode Show last searches Search Results Task List Tools Collapse current Expand current Clear results Expand all failures Expand all ignored Expand current failures Expand current ignored Tree Validation: failed Displayed in the output window when the xml validation failed. ------ Validating XML ------ Displayed in output window to indicate that the xml validation has started. Validation: succeeded Displayed in the output window after the xml has been successfully validated. Unloads the test assemblies, cancels the auto loading. &Goto definition Add reference to NUnit to the current selected project Reloads the test assemblies Run all tests Run tests Run tests Stop tests Click on run tests or refresh to activate testing Loading error Test case '${TestCase}' failed. Indicates that the test failed if the test has no error message to display. Removed the end part of the original message ", reason '${Message}'" since this is often not visible in the errors list if the test case name is long. Test case '${TestCase}' was not executed. Load Assembly... Load Referenced Assemblies Load Standard Assemblies C&lose Close all &but this S&ave Save A&s... Copy file path/name Open containing folder in Explorer String for the editor tab context menu that will open the directory in which a documents file is contained in Windows Explorer. Open command prompt here choose target frameworks Option in the "target framework" combobox in the "project upgrade" view that causes the "select portable profile" dialog to appear Could not find Portable Class Library Tools. .NET Portable Subset Name for the portable target framework, shown in Project Upgrade view Two or more frameworks must be selected. Label shown when only 0 or 1 frameworks are selected Selected profile: Label that shows the selected portable library profile Select Portable Library Profile Title of the dialog used to pick the target frameworks for a portable library project To install the Portable Class Library Tools without installing Visual Studio, save the download file (PortableLibraryTools.exe) on your computer, and run the installation program from a Command Prompt window. Include the /buildmachine switch on the command line. Collapse all nodes Add existing files Copy Link Do you want to copy the file(s) to the target directory or do you want to create link(s) to the current location of the file(s)? A file with the name '${FileName}' already exists. Do you want to replace it? Replace existing file Add &Item... Add Add Reference Add Service Reference Right click context menu option to add a service reference to the project. Add Web Reference Right click context menu option to add a web reference to the project. B&uild Clea&n Collapse all Collapses this node and all its subtree in project browser (i.e. solution explorer) Delete '${FileName}' permanently? Delete '${FileName}' and all its contents permanently? Delete '${FileName}' and its dependent files permanently? Exclude From Project Execute custom tool Existing folder... Project > Add > Existing folder Do you want to copy the folder to the target directory? Existing Item... Existing Item as Dependent Item... Context menu entry for a file; adds an existing item which will be dependent upon the selected file &Existing Project... Build documentation from XML comments Build documentation from XML comments using Sandcastle You need to edit the project build options to generate a xml documentation file. You need to compile the project. The xml documentation file does not exist, you need to compile the project. Generating documentation from XML comments requires the 'Sandcastle Help File Builder' to be installed. Message when clicking on 'generate documentation' and SHFB is missing Html E&xport Include In Project Compile Deploy New Dependent Item... Context menu entry for a file; adds a new file which will be dependent upon the selected file N&ew Folder &New Item... &New Project... New Solution &Folder The project is not a web project. O&pen Open Output Folder Opens the output folder (where the project binaries get created) in windows explorer. R&ebuild Refresh Web Reference Right click context menu option that will update/refresh the web reference (i.e. regenerates the web proxy and downloads any extra files from the web service url). Re&name &Run Project Run Project without Debugger Set as St&artUp Project View in browser New Folder Do you want to delete all web references from project {0}? Delete all web references Title of the dialog box when the user tries to remove all web references. Assemblies (*.dll)|*.dll Assembly Class name Compile Create assembly ECMA script End Explcit capture Groups Ignore case Ignore pattern whitespace Input Length Multiline Namespace Public visible Regular expression Replace Replacement string Replace result Right to left Show groups Singleline Start String Test Class name can't be empty Regex compilation failed, reason: Regex creation error, reason: File has been successfully created: Please enter a valid filename Please enter a filename match matches Please enter a regular expression Digit character Non-digit character Non-whitespace character Non-word character value Ungreedy star An ungreedy star can match any number of characters, but unlike the normal star, it only matches as few as required (by the rest of the expression). Whitespace character Word border "Word border" is a "character" of length 0 representing a location between word and non-word character - either start or end of a word. Word character value Update bitmap ... Text for the button that makes it possible to update the stored bitmap Do you really want to delete the selected resource(s)? Delete resource Can't load resource start of messagebox warning text, ex: "Can't load resource" + resourceName Error: Resource code generator is skipping resource file "{0}" because the generated class would conflict with the existing class "{1}". Resource code generator: No resource property could be generated for resource '{0}'. Comment Content Add &files... Add string e&ntry Copy resource name Context menu item; copies the name of the currently selcted resource item to the clipboard Edit comment Enter the new text for the resource comment: &Rename Show as Hex Dump Type This key is already defined! Please choose another one. All files (*.*) All known file extensions Assembly Files (*.exe;*.dll) Binary files Boo Files Boo Project Files Combine Files (*.cmbx) C++ files (*.cpp;*.c;*.hpp;*.h) C# Files (*.cs) C# Project Files Cursor files Executable Files (*.exe;*.com;*.pif;*.bat;*.cmd) Icon Files (*.ico) IL Files ILAsm Project Files Image files Key files File filter for .snk, .pfx and .key files NAnt Build Files SharpDevelop 1.1 Project Files (*.prjx) Resource Files Solutions (*.sln) VB Files (*.vb) Visual Basic Project Files XML Files (*.xml) XML Schema Files (*.xsd) File filter for .xsd files. XSL files Align to &Grid View &Code Steps Stream added! Base classes of ${Name} Base members of ${Name} The operation cannot be performed because your source code contains errors: The element cannot be renamed because it is not defined in user code. The element at the caret position cannot be renamed. Classes deriving from ${Name} Title for search results for derived classes Paste from clipboard ring... 'Paste previous' command in Edit > Insert menu Clipboard ring is empty Convert to automatic property Create Changed-event Create &getter Create OnEvent-method Create &property Current method Declaring type Menu item that contains refactoring entries for the class that contains the selected member. Expand automatic property Extract Interface Used by the refactoring context menu to call the Extract Interface dialog. Find base classes Find base symbols Find &derived classes Find derived symbols Finding references... Find &overrides Find References &Find references Go to &base class Go to &base Go to &property Implement abstract class Implement interface Implement interface (explicit) Implement interface (implicit) Names may only contain letters, digits or underscores. Names must start with a letter or underscore. Find references cannot be executed until all files have been parsed. Move class to file '${FileName}' Overrides of ${Name} Parts of ${Name} References to ${Name} Title for search results for references Remove &unused import statements Rename Title of rename input box Enter the new name of the class: &Rename Menu command to rename a member Should SharpDevelop rename the property '{0}' to '{1}'? displayed when a field that has a property is renamed Rename file to '${FileName}' Enter the new name of the member ASCII Table Clipboard Ring C# Documentation Tags General Licenses There are no tools available for the current document. Text shown in the 'tools' pad when there are no tools available XSL-T All known project formats This SharpDevelop version cannot load projects created using Visual Studio .NET 2003 (or earlier). Try using SharpDevelop 3.2 for the conversion; or create a new project and add the existing source code files. Could not save {0}:\n{1} {0} is the name of the solution. {1} is the IOException.Message property. Cannot save solution file {0}. It is marked readonly. {0} is the name of the sln file. Message shown when Solution.Save() is called on a solution with the ReadOnly attribute. Could not save {0}:\n{1}\n\nEnsure the file is writable. {0} is the file name of the solution. {1} is the value of the property UnauthorizedAccessException.Message. There were resource files in the project. SharpDevelop 2 compiles resources different: the resource name is not just the file name; but it is prefixed with the root namespace and the directory name. The resources files have been renamed/moved accordingly. The following files could not be renamed/moved automatically: used when moving of files failed '{0}' is not a valid solution file. Shown when .sln file contains invalid data. Can't read Microsoft Solution file format {0}. Database SharpDevelop Reports Cut Field Fields Add Functions Grouping/Sorting Manage grouping and sorting of the Data Paste Field Show Preview Section Visible Base Settings Design DetailSection PageFooter PageHeader ReportFooter ReportHeader Send report to printer To run SharpDevelop Reports you need at least one(1) installed Printer Errormessage when no printer is installed This is not a valid report created with 'SharpReport'. Could not read file , file corrupt (SharpReportFile is improperly formatted) Message when something is wrong with the file format Available Fields Remove Node Toggle Sortorder Remove Nodes Functions Grouping Parameters Sorting Report Explorer Preview Report Generator ReportViewer First Page Last Page Next Pages created Create PdfFile Previous Zoom Circle Reporting - Controls DataField DataRow Reporting - Functions PageNumber PageNumber of Numbers Today GroupFooter GroupHeader Image Line Pointer Rectangle Table Label Base settings Report Type : File Name : Graphics Unit Report Model Form Sheet Pull Data Push Data Report Name : Report Type : Select the GroupColumn Grouping List Layout Report layout Table Layout Pull Data Model Command Text [Delete this text and enter a valid Sql String] Push Data Model Available Fields Show Query result &Add Tab &Delete Tab Do you really want to delete tab "${TabHeader}" (this will also delete all items in tab)? &Delete Item Do you really want to delete item "${TabItem}"? &Rename Tab &Rename Item Show Authors Authors Show Change Log ChangeLog Contact Us Help Wanted Help Wanted Choose Project Location Modified Start New solution Open solution Remove from recent projects list Start Page INS OVR ln ${Line} col ${Column} ch ${Character} len ${Rows} * ${Cols} (${Total}) shown in status bar when a rectangle selection is used in the editor len ${Length} Shown in status bar when some text is selected in the editor Misc Setup Windows Applications Category for windows applications project/file templates. Class that implements ConfigurationElement. Description for CSharp.ConfigurationElement.xft Configuration Element Name of the CSharp.ConfigurationElement Class that inherits ConfigurationElementCollection. Description string for ConfigurationElementCollection.xft Configuration Element Collection Name string for ConfigurationElementCollection.xft Class that implements ConfigurationSection Description for CSharp.ConfigurationSection.xft Configuration Section Name for CSharp.ConfigurationSection.xft An empty class declaration. Class Creates an empty file. Empty File Creates a new Exception class. Exception A window for a Gtk# application. Description for Gtk# Window file template. Gtk# Window Name of the file template for a Gtk# Window. Creates an empty header file. Header File Empty HTML file Creates an empty HTML file. An empty interface declaration. Interface An empty module declaration. Module VB Module Creates a MSBuild file with an empty "Build" target. MSBuild file A template for a class extending the "My" namespace. "My" extension Creates a new NAnt build file. Description for the NAnt build file template. NAnt Build File Name for the template that creates a new NAnt build file. Creates a View for a PRISM Module with an according ViewModel. PRISM View and ViewModel (Unity) Creates a ViewModel for a PRISM Module. PRISM ViewModel (Unity) Creates a View for a PRISM Module. PRISM View (Unity) Add '#if TEST ... #endif' If true, the class is only compiled when the TEST symbol is defined. Add setup code If true, setup code will be generated. Add tear down code If true, tear down code will be generated. Context Options Implements ConfigurationCollection for storing recently opened files in your application. Recent files collection creates an empty resource file Empty resource file This class provides an easy access to persistent properties. AddIn Options An empty menu command for #D. Menu Command A #D option panel. Option Panel A command which can be used for various occasions. Simple Command A #D pad content (for example the #D scouts). Empty Pad A #D view content (for example text editor or resource editor). Empty View A class following the singleton pattern. Singleton Class A struct declaration including Equals() and GetHashCode() implementation. Struct A structure declaration including Equals() and GetHashCode() implementation. Structure Empty text file Creates a new text file. Creates a basic unit test. Unit Test A custom Web Control. ASP.NET Web Control Web Form: .aspx page with Code Behind. ASP.NET Web Form Creates an ASP.NET WebHandler with code-behind. ASP.NET Web Handler Component Frame for ASMX Web Service. ASP.NET Web Service A form for a windows application. Form A user control for a windows application. User Control WPF Flow Document WPF Page WPF Page Function WPF Resource Dictionary A WPF Custom Control WPF User Control A WPF Window WPF Window empty fragment file for WiX Empty WiX Fragment File Creates an empty setup dialog. Empty Setup Dialog Creates a setup dialog with some default controls on it. Setup Dialog Creates an empty setup document. Empty Setup Document Creates an empty setup project. Empty Setup Project Generates an app.config file. For your application. MSBuild will rename this to appname.exe.config if this project is an executable. Describes the app.config template. App.Config File File name for the app.config template. Empty XML file Creates an empty XML file. Creates an empty XML form. XML Form Creates an empty XML user control. XML User Control Creates an empty solution without projects. Empty solution A project for creating classes which are used in other Applications. Class Library A project that creates a command line application. Console Application A project that creates a command line application in unmanaged (native) code. Unmanaged console project Name for project template (A project that creates a command line application in unmanaged (native) code.) A project for creating an Application with Direct3D interface. Direct3D Application An empty Project. Empty Project A project that creates a Glade# application Glade# project template description. Glade# Application Name of Glade# project template. A project that creates a Gtk# application Gtk# project template description. Gtk# Application Name of Gtk# project template. Library that can be used on Windows, Silverlight, Windows Phone, and Xbox. Portable Class Library Creates a small PRISM Application with Bootstrapper and Infrastructure. PRISM Application - small (Unity) Creates a PRISM Application with Bootstrapper and Infrastructure. PRISM Application (Unity) Creates a PRISM Module with a View and an according ViewModel. PRISM Module (Unity) A windows installer project for creating a MSI installer. Setup Project Creates a shared add-in for COM applications. Shared Add-in A project template to quickly create a SharpDevelop addin SharpDevelop addin AddIn template that defines an entry in the "Tools" menu that takes the active text editor and modifies the selected text. Tools menu entry A project that creates a Silverlight application. Silverlight Application A project that creates an application with a icon in the notification area on the taskbar. Note: "System Tray" is NOT a valid name for the notification area. See http://blogs.msdn.com/oldnewthing/archive/2003/09/10/54831.aspx NotifyIcon Application A project that creates user controls which are used in windows applications. Windows User Control Library ASP.net web application ASP.net webpage project A project that creates an ASP.NET Web Service ASP.NET Web Service A project that creates an application with a Windows interface. Windows Application A project for creating a windows service. Windows Service Creates a simple WPF application. WPF Application Creates a simple WPF application with one navigation page. WPF Navigation Application Create a new report using the Report Wizard Configure Sidebar... &Analysis Analysis / Quality Tools main menu entry B&uild Abort build Break The caption of the Pause/Break key on the keyboard, as shortcut for aborting the build B&uild ${CurrentProjectName} &Build Solution Clea&n ${CurrentProjectName} &Clean Solution Edit configurations/platforms Publish ${CurrentProjectName} &Publish Solution R&ebuild ${CurrentProjectName} &Rebuild Solution Set configuration Set the project configuration (debug/release) Set platform &Debug Attach to Process... &Break Break the debugging process &Continue debugging Continues the process execution. Detach Can not get .NET Framework version of program. Check that the program is managed assembly. Can not attach to process. Can not start process. Can not perform action because some process is debugged. Can not start SharpDevelop debugger because kernel debugger is enabled. To disable the kernel debugger, remove the switch "/debug" from the file Boot.ini and reboot your computer. Debugging of .NET Framework 1.0 programs is not supported. Can not perform action because no process is debugged. Can not perform action because process is paused. Can not perform action because process is running. Remove all breakpoints Main menu command for removing all breakpoints + tooltip for the corresponding toolbar button (in the breakpoints pad) Run last build Run &without debugger Runs the program without attached debugger. Step into Step into Step out Step out &Step over Step over Stop process Stops the current process and terminates debugging. Toggle Breakpoint Set/remove breakpoint on current line &Edit &Copy Copy selection to clipboard Cu&t Cut selection to clipboard &Delete Delete F&olding Show &definitions only Toggle &all folds &Toggle fold &Format Capitalize Invert Case Leading Spaces to Tabs Leading Tabs to Spaces To Lower Case Remove Leading Whitespace Remove Trailing Whitespace Sort Lines... Spaces to Tabs Tabs to Spaces To Upper Case &Insert &Paste Paste as comment Paste as string Pastes the clipboard content as string literal Paste text from clipboard &Redo Redo last undo action Select &All &Undo Undo last action &Word Count… &File Clear recent files list Clear recent projects list &Close &File &Solution C&lose All Documents E&xit &New &File… Open new buffer &Project... &Solution... &Open &File… Open buffer from disc &Project/Solution… Open Project/Solution P&rint Print &Preview Changed hotkey: P&rint Preview to Print &Preview Recent &Files Recent Pro&jects R&eload file &Save Save current buffer Save A&ll Save all buffers currently open Save &As… Save with &encoding... Saves a text file by choosing the target encoding F&ormat &Align &Bottoms &Centers &Lefts &Rights To &Grid Top&s &Middles &Center in Form &Horizontally &Vertically &Horizontal Spacing &Bring to Front &Remove &Decrease &Increase Make &Equal &Send to Back &Line up icons &Lock Controls &Order &Bring to Front &Send to Back &Make Same Size &Both &Height &Width Size to Gri&d &Show large icons &Properties Show &tab order &Vertical Spacing &Remove &Decrease &Increase Make &Equal &Help &About… Context help &Dynamic Help &GPL... &ReadMe… Coding Style Guide &Tip of the Day… &Help Topics Web Navigate Back Clear Navigation History Navigate Forward &Project Project &Options… &Refactor Builds the current project. Builds all projects in the current solution. Build active project or buffer (when no project is open) (does autosave) You have to stop the debugger to build the project. Do you want to stop debugging? Stop Debugging &Run Run compiled exe (does recompile) &Search &Clear All Bookmarks Clear all bookmarks in current buffer &Find… Find &Next Find Next &Selected Search menu option that finds the next match based on the currently selected text. &Go To... Goto &Matching Brace Incremental Search Ne&xt Bookmark Goto next bookmark &Prev Bookmark Goto previous bookmark &Replace… Reverse Incremental Search &Toggle Bookmark Set/unset bookmark at current line &Tools &Convert code to Enter arguments for the tool: External program execution failed. Error while starting: Exited with code: Auto code generation Insert Color… Insert new &GUID O&ptions… Quick XML doc Regular Expressions Toolkit &View &Debug &Fullscreen Setup Dialogs Files &Show start page &Tools &Window &Next Window &Prev Window &Split Created by SharpDevelop. Date: To change this template use Tools | Options | Coding | Edit Standard Headers. Time: User: Buffer Options Comment region &Copy Cu&t File mode Indent &Paste Refactoring Uncomment region This resource is not being used. Its purpose is to test the translation database and has a line break Tooltip settings Insert selected code completion entry by typing the following characters: Only insert selected code completion entry by typing <Tab> or <Enter>. Choose exceptions you want the debugger to break on Break on Full exception name Choose exceptions Break on handled ${ExceptionName} Solution Project All opened files File Namespace Class/Module Update icon ... Text for the button that makes it possible to update the stored icon Can't load resource from file: {0} Add &boolean entry Filter: Update cursor ... Text for the button that makes it possible to update the stored cursor Search For Issues... Automatically fix issues if possible Service References Reformat Reset Run on Build Filenames: Columns: Ctrl Shift Alt Win Clear console Delete history <Text was truncated because it was too long> Building project ${Name} is not supported. Services: Operations: Manage Packages... Restore Packages Package Management Package Sources Package Management Console Code inspection Formatting Use Up/Down to move to another location. Press Enter to select the location. Press Esc to cancel this operation. Client Generate asynchronous operations Public Internal Access level for generated classes: Welcome to the SharpReport Wizard Basic report settings Classes in selected Project Page Layout No project selected, please enter FieldNames <Create ${HandlerName}> Git Options No Git installation found. (automatically detected) 'git.exe' was not found in the selected directory! Select Git path Reset Git path Git Path Press "Alt" to enter Container Assembly Info Assembly version: Company: Copyright: Description: File version: GUID: Make assembly COM-visible Neutral language: Product: Title: Trademark: Assembly info file was not found. Please ensure that the project contains assembly info file. CLS compliant Default alias: Informational version: JIT optimization JIT tracking New GUID One of the assembly info values is incorrect. None